Introduction:

1) With automatic wire setting system to set cutting wire automatically for different cutting sizes. Efficiency improved & Energy saving .

2) By vibration cutting for horizontal and vertical cutting, the whole work efficiency increase twice over compared with the traditional cutting.

3) With correct device& block holding device for each station(vertical, horizontal and cross cutting) improve the cutting high precision.

4) With PLC and light sensor control, fully-automatic;

5) Working procedure: This is a fully-automatic and continuous cutting line which can process 5 blocks together at the same time.

6) It uses PLC control, and the blocks will be stopped and transferred automatically by reaching the light sensor.

7) The block will be cut horizontally in the first station, then transferred to the next station for vertical cutting, then transferred to cross cutting station. The end is products collection

Specifications:

1) Max.Cutting Size(Max size can be cut): 6120x1230x1260mm

2) Power in Horizontal(vibration): 15KW

3) Power in vertical (vibration): 5KW

4) Power in Cross Cutting: 10KW

5) Min.Cutting Thickness: 10mm

6) Suit for Different Density Block: 4-40kg/m3

7) Cutting Speed:0-3m/min

8) Cutting Time : 6~7min (denisity15g/l)

9) Connect load:30kw

10) Recommend wire diameter: 0.4mm

Three-direction cutting, horizontal, vertical and cross cutting

Max 50 cutting wires can be automatically setin horizontal , and max 20 cutting wires for vertical and cross cutting.